Click on the dotted line at the top of a menu to "tear it off": a separate window containing the menu is created.

File Menu

New Profile Browser Create a new browser window with the same file as the one opened in the current window.
Open Profile Open a profile data file in the current window. Data files can be created withStat.dump.
Close Window Close the current window (exits from Tk if it was the last browser window).
Clear Cache Clear the sample cache, releasing its memory. The cache will be automatically filled again when needed.
This command is a kind of temporary / experimental feature. I think the cache handling should be made automatic and less memory consuming.

Pane Menu

Show Control Panel Show the control panel pane.
Show Graph Show the graph pane.
Show Table Show the table pane.

Graph Menu

Bars / Lines Choose whether the graph should be displayed using bars or lines.
When using bars, the sample value (size or count) for different kinds of objects will be stacked on top of each other so the total height represents the total value of a sample. When using lines, each line represents the value for a single kind of object. The 10 largest values are shown in each sample point. Each kind has a particular color, choosen arbitrary but it is always the same color for the same kind. The remaing kinds, if any, are shown in black.
Size / Count Choose whether the graph should display the size of objects of a particular kind or the number of objects of that kind.
(Note that this affects only the graph, the table will still choose size or kind as it were choosen in the table menu.)

Table Menu

Header submenu

This menu has a choice of header for each column of the table. The data of each column is determined by the header of that column, as well as the headers of previous columns. So if you change the first column header (A/B), the data in that column will change as well as the data under the next header (Size/Count) and the ones that follow.
A / B Use the sample at the A or B marker in the graph.
The kinds of objects shown in the table under this column are taken from the 10 largest sample values at that point, in the same order as they are shown in the graph. The ordering in the graph depends on the choice of count or size in the graph menu. However, the table may show count or size independent from the choice in the graph.
Size / Count Show the size or count of the kinds of objects in each row, taken from those choosen in the A / B column.
%A:Tot / %B:Tot Show percentage of the Size / Count column, relative to the total (size or count) at either the A or B sample point.
Cumul /
A-B / B-A
Show either a cumulative sum of the Size / Count column, or the difference A-B or B-A.
The cumulative sum is taken by summing from the first table row down to the last row.
%A:Tot / %B:Tot Show percentage of the previous field, relative to either the A or B total.
Kind Shows the kind of objects. This is currently the only alternative for this column. The kind shown corresponds to the color shown in the A / B column. A special kind is <Other> which summarizes the remaining data if there were more than 10 different kinds in the sample.

Scrollbar submenu

Auto / On / Off Choose a scrollbar mode. The usual setting is Auto which shows the scrollbar only when needed.

Window Menu

This menu lists the names of all open windows. Selecting one brings it to the top, deiconifying it if necessary.

Help Menu

About Version, author, email, copyright.
Help Open this help window.


There are 3 panes in the main window shown by default. At the top is the Control Panel, at the bottom left the Graph and at the bottom right the Table.

Control Panel Pane

This contains controls for the graph and the markers. It also has a quick-exit button and a collect button.

X / Y axis control

The two frames in the Control Panel having an X or Y button in the top left corner control each axis of the graph. The X, horizontal, axis shows the sample point. The Y axis shows either the size or count, as choosen in the Graph menu.
X / Y Button Brings up a menu, currently containing some buttons that can also be accessed directly in the panel.
Grid button Select if the graph should show grid lines.
Range buttons
- / +
Change the range that is shown in the displayed portion of the graph. For each time + or - is pressed the range will be stepped up or down in the sequence (1, 2, 5) and multiples thereoff.
Range field The current range is shown here, and a new range can be entered by writing to this field and pressing Enter. The format is an integer that may be followed by a multiplier, K, M, G, or T, meaning that the value is multipled by 1000, 1E6, 1E9, or 1E12 respectively. The maximum range is 1T.

A / B sample control

Each of the frames showing A or B in the top left corner controls one of the sample markers. The current position is shown in the bottom left corner. (This is currently not an entry field - TODO - but the marker may be moved long distances by directly dragging it in the Graph frame.)
- / + Step the marker one step to the left (-) or to the right (+).
The table will be updated to show new data if it was set to show such data that were dependent on the marker moved.
The graph will show the new marker position. If the marker was outside of the displayed portion of the graph, the graph will scroll so the marker becomes visible.
Track button Press to set the marker to the last sample in the file and stay at the end as new samples are added. (New samples are periodically read from the end of the file when auto-collect is selected via the Collect button.)
Tracking is turned off when the marker is manually moved.

Exit button

Exits the program, a shortcut for the Exit command in the File menu.

Collect button

When selected, the browser will collect new samples from the current file, and will continue to do this periodically.
Currently it will check the file for new data once a second.

Graph Pane

This pane shows the currently visible portion of the sample file. It can be scrolled via an horizontal scrollbar. The two markers are shown as buttons labeled A and B above the graph and with lines extending down in the graph. Markers can be moved by the mouse.

How to move the markers is hopefully quite self evident when tried out but I wrote up some details about it anyway.

Marker movement details

Holding down the mouse button and moving the mouse moves the underlying marker. Klicking the mouse button over a marker without moving the mouse, selects the marker. While it is selected any movement of the mouse within the graph will move the marker with it. Klicking again anywhere in the graph will deselect the marker. If the marker can be moved, the cursor will be an arrow indicating the direction it can be moved, left or right or both. If the marker can not be moved in any direction, the cursor will show a circle or disc. The marker can not move outside the available samples. Moving the mouse outside of the graph also restricts the movement of the mouse, even if the mouse button is pressed. This is intentional so that the marker can be moved longer distances than the mouse can move. Moving the mouse to the right of the graph, the marker can only be moved to the right - moving back the mouse will not move the marker back until the mouse enters the graph area again. Similarly for the left side. Above or below the graph, the mouse will not move the marker at all but will show a circle to indicate that the mouse may be 'recirculated' to move back into the graph.

Table Pane

This pane shows a table based on the configuration set in the Table menu. The sample number and time stamp show in the header.

Generated by GSL-HTML 3.0.1 on Sat Jan 23 02:08:13 2021